Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

Std 12 PHYSICS > Mechanics 3 > Flashcards

Mechanics 3 Flashcards

0
Q

Define plastic bodies

A

Bodies which do not return at all to its original dimensions after removal of deforming force are called plastic bodies/materials.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
1
Q

Define perfectly elastic bodies

A

Some bodies/materials that return exactly to its original dimensions after removal of external deforming force. They are called perfectly elastic bodies or materials.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Define elasticity

A

The property by virtue of which material bodies regain their original dimensions on removal of deforming force is called elasticity.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Define plasticity

A

The property of material to undergo permanent deformation even after removal of external deforming forces is known as plasticity.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Define deformation

A

The change in shape, size or both of a body arising due to external force is called deformation.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Define deforming force

A

The force responsible for deformation of a body is called deforming force.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Why is deformation produced in a body?

A

Deformation is produced in a body due to change in relative positions of molecules within the body due to applied deforming force.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Define Stress

A

Stress is defined as applied force per unit cross sectional area of the body.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Define longitudinal stress

A

When applied force/ deforming force produces change in length of a body, the stress associated is called longitudinal stress or tensile stress.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Define volume stress

A

If a deforming force produces change in volume of a body, the stress associated is called volume stress.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Define shearing stress

A

If the deforming force produces change in shape of the body, the stress associated with it is called shearing stress.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Define strain

A

Strain is defined as the change in dimensions per unit original dimensions.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Define longitudinal or tensile stress

A

Longitudinal or tensile strain is defined as the ratio of change in length to original length.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Define volume strain

A

Volume strain is defined as the ratio of change in volume to original volume.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Define shearing strain

A

Shearing strain is defined as the ratio of relative displacement of any layer to perpendicular distance from fixed layer.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

State Hooke’s law

A

Provided the elastic limit is not exceeded, deformation of a material is proportional to the force applied to it,

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Define modulus of elasticity

A

Modulus of elasticity of a material is defined as the slope of stress-strain curve in the elastic deformation region.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

Define elastic limit

A

The maximum value if stress up to which stress is directly proportional to strain is known as the elastic limit.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

What is set?

A

If the elastic limit is exceeded, then the body does not preserve its original dimensions after removal of external, deforming force and acquires a perfect deformation ‘set’.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

Define Young’s modulus (elasticity of length)

A

Young’s modulus is the ratio of longitudinal stress to longitudinal strain.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

Why is Young’s modulus of elasticity only a property of solids?

A

Only solids have length.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

Define Bulk modulus (Volume elasticity)

A

Bulk modulus is defined as the ratio of the volume stress to the volume strain.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

Young’s modulus is high for ________.

A

Materials with strong interatomic bonds.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

Define compressibility

A

The reciprocal of the Bulk modulus of elasticity is called compressibility of the material.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

Define modulus of rigidity (elasticity of shape)

A

Modulus of rigidity is defined as the ratio of shearing stress to shearing strain.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

Define Poisson’s ratio

A

Poisson’s ratio is defined as the ratio of the lateral strain to longitudinal strain.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

What is the range of Poisson’s ratio for a homogeneous isotropic material?

A

-1 <= 0.5

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

What it the range of Poisson’s ratio in actual practice?

A

Always positive

0.2 <= 0.4

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

Experimental Determination of Young’s modulus

A

Pg 83

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

Explain Searle’s method

A

Load applied to wire in steps of half kilogram till wire breaks.
Diagram page 84
E - elastic limit
Beyond E, small increase in strain gives large increase in stress and the graph bends towards strain axis.
Till E’ - becomes set on removal of external deforming force
Yp= yield point - graph becomes parallel to strain axis - increase in strain without increase in stress - plastic flow begins - cross section of wire decreases uniformly upto N.
Later “neck” or constriction begins to form at weak point.
N= breaking stress - maximum stress which the wire can bear.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

When is a material brittle, ductile?

A

Ductile : Plastic region from E’ to N is large.

Brittle : Material breaks soon after elastic limit is crossed.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

What are ductile substances?

A

Substances which lengthen considerably undergo plastic deformation till they break are called ductile substances.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

Define Brittle

A

Substances which break just after elastic limit is reached are called brittle substances.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

Define elastometers

A

Substances which can be stretched to cause large strains are know as elastometers.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

Examples of elastometers

A

Tissue of aorta, rubber etc

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

Explain elastometers

A

Although elastic region is very large, they do not obey Hooke’s law over most of the region. Hence no well defined plastic regions. Hence can be stretched to cause large strains.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

Force exerted by rod due to heating

A

Yα δ* θ*A

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

Application of elastic behavior of materials

A 
Design of buildings
Architecture
Suspension bridges
Beams
Cranes - factor if safety
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
38
Q

How much is the factor of safety?

A

10

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
39
Q

How is flexibility of rope managed?

A

Ultimate stress= 10(10^4)/πr2
A >_ 3.3333333 * 10^(-4)
r>_ 1 cm
In order to have flexibility of rope, made up of a large number of thin wires braided together

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
40
Q

How do suspension bridges and arched bridges support their load?

A

Suspension bridge : supports its load through tension in cables and compression in towers
Arched bridge : supports its load primarily through compression

41
Q

What happens when a beam sags?

A

Top under compression, bottom under tension.

42
Q

How can sag be minimized?

A

Giving top and bottom of beam larger cross-section, neither compression nor tension along centre line of beam, so it has smaller cross section.

Also by using material with large Y, small l, and large d and b.

43
Q

Equation for sag

A

δ= W*(l^3) / (4b(d^3)Y)

44
Q

What does sag depend on?

A

Inversely proportional to d cube
Inversely proportional to b
Directly proportional to l cube
Inversely proportional to Y

45
Q

What is buckling?

A

If the load is placed exactly at the centre of the beam and depth of the box is increased, then beam will bend as shown and this is called buckling.

46
Q

How can buckling be reduced?

A

By using an I-beam.

47
Q

What are the advantages of I-beam?

A

Minimizes both weight and stress
I beam can be much lighter but almost as strong for bending
Large load bearing surface which reduces buckling and is enough to prevent too much buckling
Provides high bending moment and a lot of material is saved. #Puneri

48
Q

Define strain energy

A

Strain energy is defined as the elastic potential energy gained by a wire during elongation by a stretching force.

49
Q

Equation for strain energy

A

1/2 * S * E * V
Or
1/2 * F * l

50
Q

Expression for longitudinal stress

A

Mg/ π(r*r)

51
Q

Expression for shearing strain

A

Tan θ= θ ( in rad)

52
Q

Expression for Bulk modulus

A

-V* (dp/dv)

53
Q

Expression for modulus of rigidity

A

η= F/(A*θ)

54
Q

Expression for Poisson’s ratio

A

σ= (d-δ(d))/(l-δ(l))

55
Q

Give reasons : rain drops, soap bubbles and small droplets of mercury take spherical shape

A

Surface tension

56
Q

Rain water does not pass through tiny holes in the fabrics of umbrellas, tents, raincoats. Why?

A

Al203 coating?

Surface tension

57
Q

Give reasons: water spiders are able to walk on the surface of water and while they walk their feet produce dimples on the surface without rupturing the film.

A

Surface Tension

58
Q

What are two characteristics of intermolecular forces?

A

Short range forces

Do not obey inverse square law

59
Q

Define Cohesive force.

A

The force of attraction between two molecules of the same substance is known as cohesive force.

60
Q

Short note on cohesive force

A

Definition
Definite shape and rigidity of solid body due to cohesion
Strongest in solids
Eg: between two air molecules and between two water molecules

61
Q

Define Adhesive force

A

The force of attraction between two molecules of different substances is called adhesive force.

62
Q

Define Range of Molecular force

A

The maximum distance between the molecules up to which the intermolecular forces are effective is called range of molecular attraction.

63
Q

Define Sphere of influence

A

An imaginary sphere drawn, with molecule as centre and radius equal to molecular range is called sphere of influence.

64
Q

Define surface film

A

The layer of surface of liquid whose thickness is about equal to range of molecular attraction is called surface film.

65
Q

Explain the cause of surface tension

A

Pg 94

66
Q

Where do molecules in water have maximum PE?

A

At the surface

67
Q

Define surface energy per unit area

A

The potential energy per unit area of liquid surface under isothermal conditions is called surface energy per unit area.

68
Q

Define surface

A

The force per unit length acting at right angles to and imaginary line drawn on the free surface of a liquid is known as surface tension.

69
Q

Expression for ‘T’

A

T = F/l

70
Q

Applications of surface tension

A

Tooth paste - contains soap, reduces surface tension, spreads more freely
Detergent - surface tension of water reduces, increases area of contact
Mosquito eggs - float on water due to surface tension of water. Kerosene is sprayed and ST is lowered and eggs go down inside water and stops breeding of Mosquitos.

71
Q

Give the expression for relation between surface energy and surface tension.

A

dw=T*dA

72
Q

Define angle of contact

A

When liquid is in contact with a solid, the angle between the tangent drawn to the free surface of the liquid and the surface of the solid measured inside the liquid is known a the angle of contact.

73
Q

Characteristics of angle of contact

A

For a given solid-liquid pair, angle of contact is constant.
Value of angle if contact depends on the nature of liquid and solid in contact.
Depends upon the medium which exists above the free surface of liquid.
Changes due to impurity.
Changes with temperature.

74
Q

Explain angle of contact

A

Pg 97
Gravity and adhesion with air can be neglected.
(i) partially wets the solid: adhesive stronger than cohesive
(ii) does not wet the solid: adhesive weaker than cohesive
(iii) completely wets the solid: adhesive very strong, cohesive can be neglected.

75
Q

When is angle of contact acute?

A

Liquid partially wets the solid. Eg: Kerosene

76
Q

When is the angle of contact obtuse?

A

Liquid which does not wet the solid

Eg: Mercury

77
Q

When is the angle of contact zero?

A

When liquid completely wets the solid.

Eg: pure water and clean glass

78
Q

Explain shape of a liquid drop

A 
Cos(θ)= (T1-T2)/T3
Where,
T1- force due to ST at solid-liquid interface
T2- at air-solid interface
T3- at air-liquid interface

If T2>T1 : theta acute
If T21 : no drop formed

79
Q

Why are small drops spherical and large drops flattened?

A

Small drop : gravitational P.E. very small, may be neglected
Large drop : energy due to gravity dominates to make P.E. minimum, tries to bring C.G. as low as possible and drop flattens

80
Q

Laplace law derivation

A

Equate dW from TdA and dW from excess pressure*area

81
Q

Laplace law of a spherical membrane

A

For liquid drop: Pi-Po= 2T/r

82
Q

Expression for excess pressure in a soap bubble

A

Pi-Po=4T/r

83
Q

Expression for excess pressure in a liquid drop

A

Pi-Po=2T/r

84
Q

Give reasons: treads of raincoat are coated with water-proofing agents like resin etc.

A

This is as they have very small force of adhesion with water and so they become waterproof.

85
Q

Define capillary

A

A glass tube having a very fine bore is called a capillary.

86
Q

Define Capillarity

A

The phenomenon of rise or fall of liquid in inside a capillary tube when it is dipped in the liquid is known as capillarity.

87
Q

Applications of capillarity

A

Sap and water rises upto the topmost leaves of trees
Water rises up in the crevices in rocks
Cloth rag soaks water
Blotting paper absorbs ink
Ink rises in a pen
Oil rises up the wick of lamp on account of capillarity

88
Q

What is the relation between pressure in concave and convex side?

A

The pressure in the concave side is greater than the pressure on the convex side.

89
Q

Explain capillary action

A

Pg 101

90
Q

Height of liquid column in capillary tube

A

h= 2Tcos(θ)/(rρg)

91
Q

Why should height be corrected in a capillary?

A

Some water above meniscus.

92
Q

What is the correction for height of liquid in a capillary?

A

h+(r/3)

93
Q

What will happen to liquid rise in capillary in the absence of gravity?

A

Rise will be upto the top as length is insufficient

94
Q

What is the effect of highly soluble impurity (eg common salt) on surface tension?

A

ST increases

95
Q

Sparingly soluble impurity like phenol or alcohol is dissolved in water. What is the influence on surface tension?

A

Decreases

96
Q

What is the effect of insoluble impurity on surface tension of water?

A

Decreases

97
Q

What does oil sprinkled in the sea do?

A

Decrease in surface tension
Waves calm down
Height of water waves reduced

98
Q

What is the effect of temperature on surface tension?

A

In most liquids except molten copper or molten cadmium, as temperature increases, ST decreases.

T at θdegC
To at 0degC
alpha- constant depends on nature of the liquid
Then over a certain range,
T=To(1-(α*θ))
99
Q

What is the effect of temperature on surface tension on molten copper or cadmium?

A

Increase in ST with increase in temperature

100
Q

Define critical temperature of a liquid

A

The temperature at which ST of a liquid becomes zero is called the critical temperature if the liquid.

101
Q

What is the effect if contamination on surface tension?

A

Presence of dust particles or lubricating materials on the liquid surface decreases its surface tension.

Std 12 PHYSICS (12 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions