Technology/Innovation Flashcards Preview

Things I Should Know > Technology/Innovation > Flashcards

Flashcards in Technology/Innovation Deck (39)
Loading flashcards...
1
Q

How is the following produced?

Paper

A
  1. Cut and dissolve: Wood is diced into single-inch chips and cooked in an acidic solution to separate the desirable plant fibers from the undesirable lignin.
  2. Treatment: The pulp is cleaned and bleached with water and a calcium-based carbonate bath. The treatment causes it to acquire the white color that is characteristic of paper.
  3. Final steps: The pulp is flattened and allowed to dry.
2
Q

Describe the mechanism, function, and/or use of the following:

Transistors

A

Mechanism: a small signal applied between two terminals is used to trigger a larger signal between two other terminals

Function: Amplifiers (either of voltage, current, or both) or digital switches (on or off) (allow for precise control of the amount and flow of current through circuit boards)

Use: amplification for sound reproduction, radio transmission, and signal processing; switch processes for logic gates

3
Q

Give a simplified explanation of how magnets work.

A

An element (A) with half-filled electron shells will exert a force on others like it (B) because their electrons are ‘falling’ into filled shells when A and B are together

(An explanation from a paper I once wrote for a physics course: Electrons and protons are oriented so that they have a natural spin in a certain direction (Similar to a spinning top), and the protons have a north and a south end too, just as magnets do. One way to think about magnets is that magnets are substances in which many of the spins of the subatomic particles are pointed in the same direction, and so this invisible force of the spin is concentrated in one direction.)

4
Q

Describe the mechanism, function, and/or use of the following:

Electromagnets

A

Mechanism: wire wrapped (i.e. a solenoid) around a ferromagnetic core (e.g. iron). More wrappings = stronger field

Function: temporary magnetism when a current is applied

Use: motors, generators, transformers, MRIs, etc.

5
Q

Describe the mechanism, function, and/or use of the following:

MRI

A

1. A large magnet is used to rotate/align the water-associated protons in a patient’s body by 90° (this is known as precession).

2. The protons then rotate back to the orientation of the main magnetic field. This rotation of magnetic field induces an electric current in the sensors around the patient, and, thus, an electric signal is produced

(I.e. opposing magnetic fields rotate body protons, and then the protons’ rotate and emit energy, producing electric currents that we can read as images.)

6
Q

Describe the mechanism, function, and/or use of the following:

Transformers

A

Mechanism: an electromagnetic force is generated by the initial coil; the ratio of loops in coil 1 and 2 is used to generate a higher or lower voltage using the EMF

Function: to either increase or decrease voltages

Use: to increase voltage in power lines so that resistance becomes less of an issue to energy transfer (V = IR)

7
Q

Transmitters vs. receivers

A
8
Q

Describe the mechanism, function, and/or use of the following:

Semiconductors

A

Simply a substance with a conductance between a conductor and an insulator (e.g. silicon).

Mechanism: transfer of electrons through a crystal lattice – passing current more easily in one direction than the other, showing variable resistance, and sensitivity to light or heat

Uses: transistors; nearly all electronics

9
Q

Describe the mechanism, function, and/or use of the following:

LEDs

A

A semiconductor light source that emits light when current flows through it;

the current excites the electrons, which then release photons as they return to their resting states

10
Q

Describe the mechanism, function, and/or use of the following:

GPS

A

1. Multiple satellites carrying atomic clocks are carefully synchronized with clocks on earth; these satellites emit radio signals (with constant wavespeeds)

2. GPS receivers monitor the position of these satellites and turn the timestamps from multiple (≥4) satellites into usable data as to how far away they are (and thus, where exactly the user is in relation to those satellites).

11
Q

Describe the mechanism, function, and/or use of the following:

Describe the basic layout of a simple combustion engine.

A
12
Q

Describe the mechanism, function, and/or use of the following:

Describe the internal mechanism of optical cameras.

A
13
Q

Describe the mechanism, function, and/or use of the following:

Colorblind glasses

A

Rare earth metals are infused in the lenses to absorb the specific wavelengths where red and green overlap the most (thus more clearly differentiating red from green)

14
Q

How is the following process performed?

Carbon dating

A

1. The radioisotope 14C is constantly being created in the atmosphere

2. 14CO2 is taken up by plants (and animals who eat the plants)

3. This stops the movement of that 14C (which begins to decay)

4. The ratio of remaining 14C to 12C present in a sample will indicate its age

15
Q

Carbon dating

  1. The radioisotope _____ is constantly being created in the atmosphere
  2. _____ is taken up by plants (and animals who eat the plants)
  3. This stops the movement of that _____ (which begins to decay)
  4. The _____ of _____ to _____ present in a sample will indicate its age
A

Carbon dating

  1. The radioisotope <strong>14</strong>C is constantly being created in the atmosphere
  2. <strong>14</strong>CO2 is taken up by plants (and animals who eat the plants)
  3. This stops the movement of that 14C (which begins to decay)
  4. The ratio of remaining 14C to 12C present in a sample will indicate its age
16
Q

How does the following work and/or what is its function?

Refrigeration

A
  1. A compressor increases the temperature/pressure on a refrigerant gas
  2. The hot gas flows through the external condensor coils, releasing heat and condensing into a liquid
  3. The liquid goes through an expansion valve, reverting to a gas (temperature/pressure go way down)
  4. The cold gas flows through the internal evaporator coils, absorbing heat
17
Q

If carbon dating is only accurate to 50,000 years ago, how do we date the past?

A

With other dating forms (e.g., uranium-uranium dating, uranium-lead dating, argon-argon dating, potassium-argon dating, etc.) that go back much further and happen to overlap with carbon dating

18
Q

Refrigeration

  1. A __________ ___creases the temperature/pressure on a refrigerant gas
  2. The hot gas flows through the external ___________ coils, releasing heat and condensing into a liquid
  3. The liquid goes through an __________ valve, reverting to a gas (temperature/pressure go way down)
  4. The ______ gas flows through the internal ___________ coils, absorbing heat
A

Refrigeration

  1. A compressor increases the temperature/pressure on a refrigerant gas
  2. The hot gas flows through the external condensor coils, releasing heat and condensing into a liquid
  3. The liquid goes through an expansion valve, reverting to a gas (temperature/pressure go way down)
  4. The cold gas flows through the internal evaporator coils, absorbing heat
19
Q

Describe the mechanism, function, and/or use of the following:

Computer memory is made of memory cells of eight binary ______ that altogether make up one ______.

A

Computer memory is made of memory cells of eight binary bits that altogether make up one byte.

20
Q

Describe the mechanism, function, and/or use of the following:

How many bits make up one computer memory cell (i.e. how many bits make up one byte)?

How many bytes are needed per character?

A

8 bits per byte;

1 byte per character

21
Q

Via what two methods can a computer ‘write’ bits into either ‘0’s or ‘1’s within memory bytes?

A
  1. Semiconductor voltage changes (high or low voltages)
  2. Magnetization
22
Q

Which part(s) of a computer memory cell (one byte, representing one character) are binary (i.e. either ‘on’ or ‘off;’ or ‘0’ or ‘1’)?

A

The bits

(all 8 of them can be either on or off – 28 – so 256 different characters possible)

23
Q

How does any specific software system ‘know’ which patterns of 8 bits (each of which is either ‘0’ or ‘1’) corresponds to which characters?

(E.g how would a computer know that 00000001 is ‘A’ and 00000002 is ‘B?’)

A

Coding schemes

(preprogramed into the operating system - basically decoder charts)

24
Q

What are the four main portions of a computer (excluding input and output)?

A

Control unit (part of CPU)

Arithmetic/logic unit (part of CPU)

Working memory

Long-term memory

25
Q

What device takes digital signals and translates them into usable information?

A

A modem

(portmanteau for modulator-demodulator)

26
Q

Describe the mechanism, function, and/or use of the following:

Routers

A

Routers serve as the connection point between the landline (a fiber, cable, or DSL modem) and personal computers;

i.e. they provide Wi-Fi and internet security by plugging into the internet source

27
Q

Wi-Fi is composed of ______ waves produced/emitted by ______.

A

Wi-Fi is composed of radio waves produced/emitted by routers.

28
Q

What is an IP address?

A

The personal network address for the router and personal devices

(used to establish a path for information to follow)

29
Q

What is an LAN?

A

A local area network — the collection of devices being served by a particular router

30
Q

Describe the mechanism, function, and/or use of the following:

VPNs

A

Virtual Private Networks

VPN client software on your computer links your device via an encrypted connection to a VPN server (at a remote location).

All personal internet use is routed through that server (and thus hidden from third-party tracking).

31
Q

Describe the mechanism, function, and/or use of the following:

What are the blockchains used in cryptocurrency?

A

Distributed databases wherein transactions are stored as data in chronological ‘blocks’ that are being confirmed by a consensus of individuals who are confirming the transaction via complicated calculations.

Once all the transactions available in a block are completed, the block is ended and tacked onto the end of the previous chain of blocks.

Thus, the chain of blocks are a record of all the transactions made; the number of calculations going into each block makes faking or reverse-engineering the blockchain extremely difficult.

32
Q

Describe the mechanism, function, and/or use of the following:

Describe the difference between MIG welding and TIG welding.

A
33
Q

Describe the mechanism, function, and/or use of the following:

Describe the basics of the Haber-Bosch process.

A
  1. N2 (from air) and H2 are pumped in a 1:3 ratio into a heated chamber containing an iron catalyst
  2. The ammonia liquid is then condensed out of the new mixture, and the unreacted gases are recycled.
34
Q

What does CRISPR stand for?

How do we wield it as a tool?

What is the CRIPSR protein called?

A

Clustered Regularly Interspaced Short Palindromic Repeats;

editing the palindromic repeats to target the specific gene sequences in which we are interested;

Cas9 (An RNA-guided endonuclease)

35
Q

How does CRISPR normally work in bacteria?

A

CRISPR is a bacterial defense mechanism (Basically bacterial immunity systems).

A bacterium defeats a virus and incorporates pieces of the viral DNA into its own DNA so that it can remember the virus later on.

Then, when it meets the virus again, it just matches up the DNA with the viral DNA and chops it up.

36
Q

What technology first allowed for widespread movement of peoples over the sea to colonize the islands of Oceania (and the Indian Ocean, etc.)?

A

Double outrigger canoes

(canoes with stabilizing logs set at a short distance on either side of the boat)

37
Q

How do solar panels function?

A

Incoming light excites/ejects electrons from the P-type, semiconductive sublayer of the solar cell; the electrons accumulate in the n-type sublayer; this difference creates a voltage that can be used to charge batteries.

38
Q

What is the name of the AI test wherein a human interacts with an AI and the AI passes the test only if the human can’t tell whether they are interacting with another human or with an AI?

A

The Turing test

39
Q

Carbon dating is accurate to how many years in the past?

A

~50,000