APU & Powerplant Flashcards Preview

JetBlue A320 SPV 2021 > APU & Powerplant > Flashcards

Flashcards in APU & Powerplant Deck (8)
Loading flashcards...
1
Q

What does illumination of the FAULT light in the APU master sw indicate?

A

APU auto shutdown has occured

2
Q

What does the green AVAIL
light represent in the
START pb?

A

APU Start Sequence Complete
And
APU is available for use
(N1 >99.5% or 2 seconds after reaching 95%)

3
Q

What does the cyan ON light indicate after the APU START pb has been pressed?

A

APU Starter Energized

4
Q

What does the A/THR annunciation LVR ASYM mean?

A

Appears amber if, with A/THR active, both engines running, one thrust lever is out of the CLB detent

5
Q

With the ENG MODE SEL switch in NORM (with the engine running), when is continuous ignition automatically selected?

A

 Engine flameout of surge detected

 Quick Relight (Master cycled ON-OFF-ON)

 Engine Running and….
Approach idle config selected
EngAnti-Ice is on
Go Around with > 0 Flaps
EIU data failed

6
Q

What does the flashing LVR CLB indication mean?

A

Thrust levers are not in CLB detent
Both engines running
Above the thrust reduction altitude

7
Q

What does the flashing LVR MCTindication mean?

A

Power is not set to MCT, after engine failure, above green dot, clean config.

(Note that TL’s MAY BE in the FLX/MCT detent).

8
Q

The flashing LVR MCTindication occurs after an
engine failure, once the a/c speed is above green dot.
How can you extinguish this indication?

A

Move thrust levers out of the FLX/MCT detent (CLB detent recommended) and then back to the FLX/MCT detent