Lobster tools (28)

Question 0

Battery life for lobster tool?

Answer 0

Approx 500 charges

Question 1

How long does it take to charge?

Answer 1

20 minutes quick charge

Question 2

The tool will not work well when the temperature is below ?

Answer 2

Below 32 degrees F

Question 3

What r the two ways to warm up lobster tool prior to use?

Answer 3

• storing the tool in a heated area

- use the trigger lock to get the tool to run continuously for 5 mins without any load

Question 4

When the battery is low, the pilot lamp display will flash to alert the operator that the battery capacity is less than ____ percent

Answer 4

20

Question 5

A fully charged battery for the lobster tool will last for approx ____ cuts

Answer 5

40

Question 6

The lobster tool should be operated _____ to check for defects

Answer 6

Weekly

Question 7

• every 6 months

- units shall change the oil January 1st and July 1st. The tool room will provide co’s with the necessary hydraulic oil

Answer 7

The lobster tool needs its hydraulic oil changed every ___ months
When should members change the hydraulic oil?

Question 8

Batteries of the lobster tool should be checked when ?

Answer 8

Start of each tour for charge status

Question 9

Who does officer contact when lobster tool becomes inoperable?

Answer 9

Tech services

Question 10

Trucks, squads and rescue carry the rebar cutters. What is the lobster tool used on and what are its limitations?

Answer 10

Used to remove window/door gates, wrought iron fences up to 5/8” in diameter. It is not to be used to cut case hardened steel rods or locks