Limitations to X-ray quality Flashcards Preview

Specialism: Diagnostic Radiology > Limitations to X-ray quality > Flashcards

Flashcards in Limitations to X-ray quality Deck (24)
Loading flashcards...
1
Q

Limitations to X-ray image quality

A

Unsharpness
Scatter
Noise

2
Q

Types of Unsharpness

A

Geometric
Movement
Detector

3
Q

Main causes of unsharpness

A
Focal spot size
Focus-object-film distance
Detector design (pixel size)
Screen-film system
Movement
4
Q

Effect of focal spot size (1), FFD (2),Focus-Obj Dist (3) and Compression (4)

A

(1) Inc spot size = Inc penumbra
(2) Dec FFD = Inc Mag, Inc unsharpness
(3) Dec FOD = Inc unsharpness
(4) Compression brings structures together, inc sharpness

Mag mammo uses fine focus to decrease penumbra

5
Q

Calculating Geo unsharpness

A

Blur b = yf/x = f(M-1)

Unsharpness = Ug = f(M-1)/M = yf/(x+y)

6
Q

Reducing Geo unsharpness

A
  • Small focal spot
  • Long source-Im dist
  • Short obj-im dist
7
Q

Causes of Receptor Unsharpness

A

Digital: Detector design / Mat pixel size

- CR: laser spot size

8
Q

Calculating receptor unsharpness

A

Ur = F/M

F = intrinsic unsharp for zero thickness object on receptor.

9
Q

Total Unsharpness

A

U = sqrt(Ug^2 + Ur^2)

= 1/M sqrt(f^2(M-1)^2 + F^2)

10
Q

Movement Unsharpness and minimising it

A

Internal movement: Breathing, heartbeat

Min: Use short as poss exposure time

Reduce mag: Long FFD, short FOD

Use compression in mammo

11
Q

Define scatter

A

Detected photons with no spatial information

Acts like fog on an image

12
Q

Contrast with and without scatter

A

Without scatter: C = 1 - e ^ x(μ1 - μ2)

With scatter:

C = 1 - e ^ x(μ1 - μ2) / 1 + R

R = scatter to primary ratio

1/1+R C degradation factor

13
Q

Grid structure calculations

A

Lines per mm N = 1/(D+d)
Grid ratio r = h/D

d= septa width D = low atten width

14
Q

Grid impact and designs

A

Inc patient dose

Grid moves to avoid artefacts

Complex design: HTC, complex movement

15
Q

Grid parameters

A

Primary transmission: ideal 1 real 0.6

Scatter trans fact: ideal 0 real 0.05-0.2

Bucky factor: inc in dose due to grid, kV, patient thickness. Grid ratio is factor 3-8

Contrast imp factor: ratio of contrast deg factor with and without grid

16
Q

Air gap

A

Gap betw patient exit surface and detector

Photons scatter out of primary area

Cause magnification

1/r effect due to atten of scatter

17
Q

Scatter reduction

A
  • Use collimation
  • Use a low kV
  • Use a grid
  • Use an air gap
  • Use compression
18
Q

Types of noise

A
  • Quantum noise
  • Fixed pattern (structure) noise
  • Electronic noise
  • Anatomical noise
19
Q

Impact of counts on SNR

A

Noise = sqrt N
SNR = N/ sqrt N = sqrt N
4 x N -> 2 x SNR

20
Q

Define quantum noise

A

Caused by statistical fluctuation in the number of photons per unit area absorbed in detector
Dominant source of image noise

21
Q

Define fixed pattern noise

A

Variations in pixel sensitivity, filter thickness, table top attenuation etc
Equivalent to a signal prop to dose
Reduce by using flat-fielding in DR

22
Q

Define electronic noise

A

Arises from detector and detector electronic/thermal effects
Assumed to be constant
Significant at lower doses

23
Q

How to combine noise

A

nt = sqrt (n1^2 + n2^2)

24
Q

Noise component analysis

A

For a given detector air kerma (AK)

  • Quantum noise: sq = a(AK)1/2
  • Fixed pattern (structure) noise: ss=b (AK)
  • Electronic noise: se = c
  • Total noise st = sqrt (a2(AK) + b2(AK)2 + C2)

st = std lin. pixel value