IFR and Cap gen review Flashcards Preview

King Air 200 > IFR and Cap gen review > Flashcards

Flashcards in IFR and Cap gen review Deck (21)
Loading flashcards...
1
Q

What is Accelerate Stop Distance Avaliable? (ASDA)

A

The length of the take-off run available plus the length of the stopway, if provided.

2
Q

Runway Number is given in the name of the approach when…

A

procedure can be used for straight-in minima.

3
Q

Take off distance available?

A

The length of the take-off run available plus the length of the clearway, if provided.

4
Q

Take Off run available?

A

Length of runway declared available and suitable for the ground run of an aeroplane taking off.

5
Q

Threshold crossing height?

A

height of the glide path above the runway threshold.

6
Q

Take-Offs are being governed by..?

A

Visibility

7
Q

Approach Restrictions governed by..?

A

RVR

8
Q

Landings governed by?

A

DH/MDA

9
Q

RVR 2600 is how many miles?

A

1/2

10
Q
For arrivals operating visibility is based on:
1) Pilot Visibility 
2) RVR  for the runway of intended use 
3) Aerodrome Visibility (METAR) 
Put these in correct order
A

2,3,1

11
Q
For Departures,operating visibility is based on: 
1) Pilot Visibility 
2) RVR  for the runway of intended use 
3) Aerodrome Visibility (METAR)
Put these in correct order
A

3,2,1

12
Q

Departure Procedures meet obstacle clearance requirements and are based on the premise that on departure an aircraft will:

A

a) cross at least 35 feet above the departure end of the runway
b) climb on runway heading to 400 feet AAE before turning;
c) maintain a climb gradient of at least 200 ft/nm throughout the climb to the minimum altitude for enroute operations.

13
Q

Aircraft Category A?

A

Up to 90kts

14
Q

Aircraft Category B?

A

91kts-120kts

15
Q

Aircraft Category C?

A

121kts-140kts

16
Q

Aircraft Category D?

A

141kts-165ts

17
Q

Aircraft Category E?

A

over 165kts

18
Q

What is Spec vis for Category B aircraft ?

A

1 1/2

19
Q

What is spec vis for Category D aircraft ?

A

2

20
Q

If standard alternate minima (600-2) applies what can be used as per sliding scale?

A

700-1 1/2, 800-1

21
Q

If standard alternate minima (800-2) applies, what can also be used as per the sliding scale in the cap?

A

900-1 1/2, 1000-1