Evolution 6 Drafting Ans Supplying Second Pumper Flashcards Preview

Evolutions > Evolution 6 Drafting Ans Supplying Second Pumper > Flashcards

Flashcards in Evolution 6 Drafting Ans Supplying Second Pumper Deck (8)
Loading flashcards...
0
Q

You should connect which end of suction to the inlet of pumper

A

Female butt

1
Q

What knot is used used To secure strainer end of suction connection when drafting water

A

Clove hitch and binder

2
Q

What side of pumper should be inboard

A

The operating side

3
Q

When laying out hose you should lay out 3 inch hose and 2 1/2 inch hose which do you lay out first and which do you connect first

A

Lay out hose simultaneously but connect 3 inch first

4
Q

When tying off suction connection you can tie off to a substantial part of the bulkhead or pumper which is the preferred method

A

Tying off to the substantial part of pumper is preferred

5
Q

True or false the strainer end is placed perpendicular to and just below the surface of water

A

False :

Parallel and well below the surface

6
Q

When supplying the second pumper you must stretch one 3 inch line and one 2 1/2 each line simultaneously

A

False u may stretch two 3 inch supply lines if necessary

Notes :
Connections in suction line must be air tight

connect and supply second pumper with 3 inch hose first then connect 2 2/2 to second pumper using a 2 1/2 to 3 increaser

7
Q

All connections and knots of suction assembly should be made before connecting to inlet side of the pumper
True or False

A

True