Engine / APU Panels - Rev 04 Flashcards Preview

VX Oral Study Guide > Engine / APU Panels - Rev 04 > Flashcards

Flashcards in Engine / APU Panels - Rev 04 Deck (7)
Loading flashcards...
1
Q

What are the primary differences between an automatic and a manual start?

(FCOM-DSC-70-80-40)

A

a. Automatic Start - The FADEC provides full monitoring during start and will provide appropriate ECAM cautions and procedures to follow in the event of a start fault

b. Manual Start - Automatic start interruption and auto-crank are not available

2
Q

When would you use a manual start?

(QRH-SUPP DATA)

A

After aborting a start because of:

a. Engine stall

b. Engine EGT overlimit

c. Low start air pressure

When expecting a start abort because of:

d. Degraded bleed performance due to hot conditions or at high altitude airports

e. An engine with a reduced EGT margin in hot conditions or at high altitude airports

f. Marginal performance of the external pneumatic power group

3
Q

What does the green AVAIL light on the APU START pushbutton indicate?

(FCOM-DSC-49-20)

A

APU N is above 99.5% or 2 secs after N reaches 95%

4
Q

With the APU green AVAIL light ON and the EXT PWR green AVAIL light on, which system is powering the

aircraft?

(FCOM-DSC-24-10-30-10, FCOM-DSC-24-20)

A

APU

5
Q

How long should you wait to push the APU START pushbutton after engaging the APU MASTER switch

(FCOM-PRO-NOR-SOP-04)

A

3 sec

6
Q

What does an amber FAULT light in the APU MASTER SW pushbutton indicate?

(FCOM-DSC-49-20)

A

The Electronic Control Box (ECB) commanded an auto shutdown of the APU

7
Q

What does an amber FAULT light in the APU BLEED pushbutton indicate?

(FCOM-DSC-36-20)

A

An APU bleed leak