CompTIA+901_Mock_3 Flashcards Preview

CompTIA+901 > CompTIA+901_Mock_3 > Flashcards

Flashcards in CompTIA+901_Mock_3 Deck (90)
Loading flashcards...
1
Q

Which default port is used by the Telnet protocol?

A

TCP/IP 23

2
Q

John is a PC technician for an organization that has a computer network with 12 computers. Each contains vital information, so each uses static IP addresses. John just finished troubleshooting a Windows 8.1 computer that could not access the network. He ascertained (correctly) that the computer needed a new network card. He purchased a Plug and Play card and physically installed the card. He then turned on the computer, noting that the network card’s LED link was lit and that there was activity. He then rebooted the computer to Windows and then documented the whole process. Later, his boss tells him that the user is complaining that she cannot access the Internet. Which step of the A+ troubleshooting theory did John forget to perform?

A

Verify full system functionality

3
Q

What kind of cables use either a BNC connector or an RJ-45 connector

A

Network cable

4
Q

Which component is used to provide those features that are not offered by the motherboard?

A

Adapter card / Expansion card

5
Q

Which port is used by default by RDP?

A

TCP/IP 3389

6
Q

Which classes of IP address allows highest numbers of hosts per network?

A

Class A: 16,777,214

7
Q

Which video standard is not likely to support high-definition 1080p resolution

A

S-video

8
Q

Blocking port number 143 will affect communication of which of the following protocols?

A

TCP/IP IMAP

9
Q

Which sort of cable carries analog video signal across three separate physical channels?

A

Component

10
Q

Which of the following should be used when building a high-end graphics workstation for CAD applications?

A
  1. Main memory of 16 GB or more This answer is correct.

2. A PCIe video card with a large amount of memory

11
Q

Which ports are able to transfer data at the rate of 400Mbps and more? Select all that apply

A
  1. USB 2.0

2. FireWire

12
Q

Which devices are used by microprocessors to prevent it from overheating?

A
  1. Fan

2. Heat sink

13
Q

You work as network administrator for Tech Perfect Inc. The company has a TCP/IP-based network. You want to know the current TCP/IP network configuration settings, DHCP server IP address, and DHCP lease expiration date of your network.

A

Ipconfig

14
Q

How many bits are used in an IPv4 address?

A

32 bits

15
Q

Which tool is used to join connectors to its cables?

A

Crimper

16
Q

A customer wants to control several computers with a single set of input devices. Which of the following solutions should you provide for them?

A

KVM

17
Q

Andrew configures a hard disk drive and a serial port on his computer’s BIOS. Where does BIOS save this information?

A

CMOS

18
Q

Match the correct RAID type to the correct characteristic(s)

A

RAID 5
a. Lower cost-per-gigabyte than RAID 1. Uses striping with distributed parity. Highest fault tolerance.This answer is correct. The correct answer is: Lower cost-per-gigabyte than RAID 1. Uses striping with distributed parity. Highest fault tolerance.
2. RAID 0
Selected: c. A loss of a single disk in the stripe set destroys the data on the entire volume. Uses striping.This answer is correct. The correct answer is: A loss of a single disk in the stripe set destroys the data on the entire volume. Uses striping.
3. RAID 1
Selected: b. Uses mirroring

19
Q

Which of the following would be suitable for 1000 Mb/s networks?

A
  1. Category 5e

2. Category 6

20
Q

You have just set up a network that will use the TCP/IP protocol, and you want client computers to be able to search for and communicate with other computers by using hostnames. Which type of server will help with this?

A

DNC

21
Q

Which would benefit the most from the use of dual monitors?

A

A/V editing workstation

22
Q

Which type of card should be used to record off-air television programs?

A

Video capture card

23
Q

Which network devices moves frames of data between a source and destination based on their MAC addresses?

A

Switch

24
Q

Which technology assigns addresses on the 169.254.0.0 network number?

A

APIPA

25
Q

How many octets in a class C IP address are reserved for network ID?

A

First 3

26
Q

Which type of display uses the most power?

A

Plasma

27
Q

In which network design do users access resources from other workstations rather than from a central location

A

ad hoc = peer to peer

28
Q

What is the starting IP address of class B?

A

128.0.0.0

29
Q

You work as a Network Administrator for De Laurentis Unlimited Inc. The company has a TCP/IP-based network. You are configuring a cable modem on the network to connect to the Internet. Which types of connectors are supported by the cable modem?

A
  1. RJ-45
  2. USB
  3. F-type
30
Q

What is the most common type of networking connector?

A

RJ-45

31
Q

What types of cables are used to connect speakers/audio devices to a sound card?

A
  1. 1/8-inch mini-jacks

2. S/PDIF

32
Q

Which of the following allows voice communication over IP-based networks?

A

VoIP

33
Q

Which protocol allows the encryption of transmissions using the SSH protocol?

A

SFTP

34
Q

Match the correct definition to the tool type.

A
  1. Toner probe
    It is used to test network ports. One end of the device is plugged into a port and generates a tone. On the other end of the connection, you use a device which turns the electrical tone into an audible tone.
  2. Wire stripper
    It is a hardware tool to remove the outer insulation from network cables and expose the wires inside them.
  3. Punch down tool
    It is used to connect the network cable to the patch panel, which has a number of connections for attaching the cables to the hub or other devices.
  4. Crimper
    It is a tool designed to connect a connector to the end of a cable.
35
Q

The IP address 128.0.0.1 would be part of which IPv4 class?

A

Class B

36
Q

Which is the best protocol to use when securely transferring large files?

A

SFTP

37
Q

Which of the following adapter cards uses an RJ45 connector?

A

NIC

38
Q

Which of the following devices should be configured to block specific ports on the network?

A

Firewall

39
Q

You have just taken over network support for a small company. They are currently using MAC filtering to secure their wireless network. Is this adequate or not and why or why not?

A

You should have WPA2 encryption.

40
Q

Which connectors are used with fiber-optic cables?

A
  1. SC

2. ST

41
Q

Which address needs to be configured to enable a computer access to the Internet or to other networks?

A

Gateway address

42
Q

A customer reports to you that he cannot access the company FTP site. He says that he is using the IP address given to him: 86200.43.118. What is most likely the problem?

A

This is an invalid IP address

43
Q

You’re responsible for technical support at a High School. You’re concerned about students with some technical knowledge reconfiguring machines, either maliciously or not. You have already made sure Windows is secure and the students’ login has the minimum necessary privileges. What else should you do to prevent students from re-configuring the school lab computers?

A

Put a password on BIOS.

44
Q

Which tool is used to test a network adapter not connected to the network?

A

Loopback plug

45
Q

A user can receive e-mail but cannot send any. Which protocol is not configured properly?

A

SMTP

46
Q

Which of the following connectors is described in the statement below?
“It is a threaded medium performance coaxial signal connector, which is used in TVs and VCRs. The pin of the connector is actually the center conductor of the coaxial cable. It is an inexpensive connector.”

A

F-connector

47
Q

What is the maximum data transfer rate of IEEE 1394a?

A

400 Mb/s

48
Q

What is the physical component where data is stored in a HDD?

A

Platter

49
Q

Which connector is most commonly used with POTS lines?

A

RJ-11

50
Q

You want to test the local loopback IPv6 address. Which address would you use?

A

::1

51
Q

Which one of the following is a valid APIPA address?

A

169.XXX.X.X

52
Q

Which of the following is the most secure protocol used for encryption in a wireless network?

A

WPA2

53
Q

What does the x refer to in Compact Disc technology?

A

X= 150 KB/s

54
Q

Which type of IPv6 address is commonly assigned to client computers?

A

Unicast

55
Q

Which of the following does not have to do with virtualization?

A

CAD/CAM

56
Q

Which are most often used to connect a group of computers in a LAN?

A
  1. WAP

2. Switch

57
Q

Which protocol uses port 22?

A

SSH

58
Q

How many pins are used in HDMI Type A and Type B connectors?

A

19,29 pins

59
Q

What does a KVM do?

A

Connects multiple computers to save resources

60
Q

Which of the following network devices allows a remote device to obtain Ethernet data as well as electrical power?

A

PoE injector

61
Q

Of all network cabling options,_offers the longest possible segment length

A

Fiber optic

62
Q

You have been tasked with running a network extension to the warehouse that is 50 meters (164 feet) away. The proposed path will take the network extension near several fluorescent light fixtures and a large electric motor. Which of the following cables would be best for this environment?

A

Fiber-optic

63
Q

Which port is used by the IMAP protocol?

A

TCP/IP 143

64
Q

How many bits are used in an IPv4 address?

A

32 bits

65
Q

Which type of SSD uses a shorter wavelength and allows for almost six times more data storage than on a DVD?

A

Blu-ray Disc

66
Q

Which tech was developed specifically to allow SATA drives to be connected to a computer system externally without forfeiting any of the benefits of SATA?

A

eSATA

67
Q

Which device is the PCMCIA commonly used?

A

Laptop computer

68
Q

What is an example of a valid IPv6 address?

A

9031:8611::5468/64

69
Q

Which of the following describes the use of DNS as it relates to TCP/IP networks?

A

Provides mapping of user-friendly names to network resources

70
Q

What default subnet mask is used with the Class C private IP address range?

A

255.255.0.0

71
Q

Which of the following is an enclosure that is used to move air for heating, cooling, or humidity control in a building?

A

Plenum

72
Q

What are the pinout differences between the T568A and T568B standards?

A

The wire colour attached to pin 1, pin 2, pin 3, pin 6

73
Q

You have been tasked with connecting a wireless earpiece to a smartphone. Which technology would you most likely use?

A

Bluetooth

74
Q

You are using a cable that contains a layer of braided wire or foil between the core and the outside insulating layer, plus another layer of plastic or rubberized material that separates the central core from the shielding layer. Which of the following cables are you working on?

A

Coaxial

75
Q

What is a loopback address in IPv4?

A

127.0.0.1

76
Q

Which port forwards an external network port to an internal IP address/port on a computer on the LAN?

A

Port forwarding

77
Q

Which of the following has a data transfer rate of 40 Gb/s and uses a USB Type-C connector?

A

Thunderbolt version 3

78
Q

Which hardware devices prevents broadcasts from crossing over subnets?

A

Router

79
Q

Which are some types of broadband access? Select all that apply.

A
  1. DSL
  2. Cable
  3. Fiber optic
80
Q

A Windows computer will be used to store a couple of important files. This computer will be separate from the organization’s server and the owner does not want it to be actively running all the time. Which setting in the network adapter’s properties should be configured so that remote users can view those files even when the computer is asleep?

A

Wake-On-LAN

81
Q

How many colors are there if the color depth in Windows is set to 32-bit?

A

4 million

82
Q

Based on the following information, which address is most likely that of the DNS server?

A

Fe80::403b:e791:b151:b92a%11(Preferred)

  1. 168.1.115(Preferred)
  2. 255.255.0
  3. 168.1.1
  4. 198.0.38 — > correct answer
83
Q

Which unique address is a 128-bit address written in hexadecimal?

A

IPv6

84
Q

You are configuring a router for a small marketing company. Some employees of the company frequently make connections with laptops of sales personnel who are outside the network. You want the return connection from outside the network to be automatically routed to the internal computer that initiated the connection. What would allow you to do this?

A

Port triggering

85
Q

One of your customers tells you of some trouble accessing the company Wi-Fi network with a laptop. She could access the network yesterday before she went on the road with a laptop. Which of the following is most likely cause of the problem?

A

The laptop’s Wi-Fi switch is off.

86
Q

A thin client is a passive device with low-maintenance requirement that is easy to install and operate. Which of the following statements are true about the thin client?

A
  1. Flash memory is the critical component of the thin client terminalThis is the correct answer.
  2. It is fed and controlled by the server.This answer is correct.
  3. It depends on its server in order to fulfill its traditional computational role requirement
87
Q

You just rebooted a PC and it displays a black screen with a white blinking underscore on the top left. What is the most likely problem?

A

Incorrect boot order

88
Q

What is the maximum number of devices that can be connected to a FireWire 800 port?

A

TCP/IP 63

89
Q

Which are the types of the IEEE1394 connectors?

A

4- Pin

6- Pin

90
Q

Which TCP/IP protocol uses port 110?

A

POP3