ARE Endurance- Site Flashcards Preview

ARE 4.0 SITE PLANNING AND DESIGN > ARE Endurance- Site > Flashcards

Flashcards in ARE Endurance- Site Deck (77)
Loading flashcards...
1
Q

geographic area from which the participants in an activity are drawn. It grows and shrinks with the activity.

A

catchment area aka mark, trade, or tributary area

2
Q

catchment area determined by the local transit systems

A

residential catchment area

3
Q

geotechnical test to determine the maximum, practically achievable, density of soils and aggregates

A

proctor compaction test

4
Q

test method to determine the rate at which soil absorbs effluent. Used to test suitably of soil for a leachfield.

A

percolation test

5
Q

partially treated liquid sewage flowing from any part of a disposal system to a place of final disposition

A

effluent

6
Q

verbal description for the boundaries, property lines, or limits of a parcel of land, as defined by distances and compass bearings

A

metes and bounds

7
Q

wetland that features permanent inundation of large areas of land by shallow bodies of water, generally with a substantial number of hummock, or dry-land protrusions

A

swamp

8
Q

an elongated depression in the land surface that is at least seasonally wet, is usually vegetated and is normally without flowing water

A

swale

9
Q

low lying area that is designed to temporarily hold a set amount of water slowly draining to another location. This controls the surface runoff or flood control during flash flooding

A

detention pond

10
Q

designed to hold a specific amount of water indefinitely. If the pond reaches above its capacity the water usually drains to another location while still containing water.

A

retention pond

11
Q

a system of rights and duties that determine the reasonable use, duties, and allocations of water to owners of waterfront property. Owners can use water adjacent to their property but can’t infringe upon the rights of other to use the water.

A

riparian rights

12
Q

the study of the occurrence, movement, and quality of water on a site

A

hydrology

13
Q

elevated artificial channel that carries fast moving water and is used to transport logs, fish, etc.

A

flume

14
Q

embankment, levee, or dam formed to hold a river or stream or divert water flow

A

weir

15
Q

how much radiant energy that is reflected by a surface where 0 is a flat black surface which absorbs all heat and 1 is a mirror that reflects

A

albedo

16
Q

the speed with which heat passes through a material

A

conductivity

17
Q

climate based on latitude, elevation, and proximity to water

A

macroclimate

18
Q

climate based on solar radiation, the angle between the ground and altitude

A

microclimate

19
Q

the air temperature at ground level is lower than higher elevations causing the heavy, cold trapped air below to release pollutants

A

air pollution temperature inversion phenomenon

20
Q

the science of the pattern of relationships between organisms and their environment

A

ecology

21
Q

an environment of living organisms and non-living components

A

ecosystem

22
Q

well drained and able to bear loads. Granular rock particles 1/4”-3 1/2”

A

gravel

23
Q

well drained and can serve as foundation when graded. Loose granular rock .002”-1/4”

A

sand

24
Q

stable when dry, swells when frozen, do not use when wet. Fine grained sedimentary material from running water .002” -.05”

A

silt

25
Q

Must be removed, too stiff when dry and too plastic when wet. Firm cohesive material formed from the decomposition of hydration of certain rocks.

A

clay

26
Q

soil, sand, or mud deposited by flowing water

A

alluvium

27
Q

soft dark soil containing decomposed organic matter, poor bearing capacity

A

humus

28
Q

rich soil containing equal parts of sand, silt, and clay

A

loam

29
Q

Type of shallow foundation; it delivers load directly to the soil. Area of the footing = load/safe bearing capacity, $

A

spread footing

30
Q

Type of shallow foundation; one large footing under an entire bldg. Used when soil conditions are poor, $$$

A

mat foundation

31
Q

Type of deep foundation; holes are drilled to firm strata and concrete poured.

A

belled caisson

32
Q

Type of deep foundation; like belled caissons, but the hole is drilled deep into the strata. bearing capacity comes from the end baring and fractional forces

A

socketed caissons

33
Q

Type of deep foundation; 2-3x cost of spread footings. Drive until tip meets firm resistance from strata

A

end bearing piles

34
Q

Type of deep foundation; driven into softer soil. Friction transmits the load between the pile and soil. Bearing capacity is limited by whichever is weaker; the strength of the pile or the soil

A

friction pile

35
Q

a collective vision of how urban and suburban planning should follow certain fundamental principles regarding community size, intergration, transportation, open space, pedestrian paths, native vegetation, water and energy use. (1991)

A

ahwahnee principles

36
Q

process of ensuring that system are designed, installed, and functionally tested for effective operation/ maintenance for an owner’s operational needs

A

building commissioning

37
Q

systematic investigation process applied to existing building to impove an optimize operating/maintenance

A

retrocomissioning

38
Q

provides a tool for determining long-term costs for the total building

A

life cycle costing

39
Q

measure of heat transmission where a low U-value has a slow heat loss or gain (brick wall) and a high U-value has a rapid heat loss or gain (window)

A

U-Factor

40
Q

measure of thermal resistance is in a component. (U-value = 1/R-Value) and typically the opposite of an U-Value. Used to define level of insulation

A

R-Value

41
Q

Ability of a material to store heat ( concrete/masonry walls store heat in an arid climate and release it slowly at night)

A

thermal inertia

42
Q

a tamper roller used during the soil compaction process which has large teeth to increase soil stability and bearing capacity

A

sheepsfoot

43
Q

horizontal brace of steel or timber used to support sheathing or other members such as concrete form work

A

wale

44
Q

creating shallow excavations used for pouring small footings and foundation walls or to provide drainage of surface water

A

trenching

45
Q

temporary wood or steel bracing usually set at an angle and used to hold walls in place

A

shoring

46
Q

providing additional support to an existing foundation by rebuilding or reinforcing

A

underpinning

47
Q

a temporary diagonal brace used to support vertical sheeting against earth walls created by excavation

A

raker

48
Q

horizontal boards 2-4” thick placed between soldier beams to hold soil in place during excavation

A

cribbing

49
Q

Division ___ = existing conditions (natural conditions)

A

division 2

50
Q

Division ___ = concrete (footing)

A

division 3

51
Q

Division ___ = earthwork

A

division 31

52
Q

Division ___ = exterior improvements

A

division 32

53
Q

Division ___ = utilities

A

division 33

54
Q

Division ___ = transportation

A

division 34

55
Q

a reservoir in which debris and sediment from runoff may settle before it enters the storm drain

A

catch basin

56
Q

the lowest point or lowest inside surface of a drain, sewer, or pipe established due to the dependency of gravity

A

invert

57
Q

drain or channel that permits the passage of water below ground. Typically a large diameter concrete or metal pipe often used under a road

A

culvert

58
Q

perforated pipe surrounded by granular fill used to release hydrostatic pressure from foundation of retaining walls

A

drain tile

59
Q

plastic or foil sheet that resists the diffusion of moisture through wall, ceiling, and floor assemblies, located on the warm side of the insulation.

A

vapor barrier

60
Q

a unit that measures how often outdoor daily dry-bulb temperatures fall below an assumed base, normally 65F

A

heating degree day

61
Q

is the flow of water through holes, cracks, and other discontinuities into the basement walls

A

bulk moisture

62
Q

occurs when water wisks into the cracks and pores of porous building materials (masonry blocks, concrete, or wood). These tiny cracks and pores can absorb water in any direction even upward

A

capillary action

63
Q

the angle of the sun 90 degrees or less above the horizon

A

solar altitude

64
Q

the angle of the sun from due north in a clockwise direction, given in degrees

A

solar azimuth

65
Q

the SI unit of luminous flux, a measure of the total amount of visible light emitted by a source

A

lumen

66
Q

a photometric measure of the luminous intensity per unit area of light traveling in a given direction

A

luminance

67
Q

the illuminance cast on a surface by one-candela source one foot away

A

foot candle

68
Q

brightening of the night sky that inhibits the observation of start and planets, caused by street lights and other man-made sources

A

light pollution

69
Q

determining land value; compared to other similar parcels and is the most accurate if current data is available.

A

Comparison Method

70
Q

determining land value; when comparisons aren’t available, use estimates to determine the selling price of a lot, cost to develop, time to develop, and net sale price.

A

Development Method

71
Q

determining land value; used in highly developed area by estimating potential income from improvements that yield the highest return (highest and best use)

A

Residual/Income Approach method

72
Q

determining lan value; used to determine value of improved properties by deducting the value of site improvements to get the value of the land

A

allocation method

73
Q

Soil Test: locations depend on nature of the building and should be about 20’ past firm strata.

A

Boring

74
Q

the drilling of a test hold to locate bedrock beneath very compact soil. A pipe is driven into the soil while water forces the material to the surface. It can penetrate all materials other than rock.

A

Wash Boring

75
Q

Soil testing that uses auger drill big fastened to a rod to bring the soil to the surface. Most efficient in sand and clay because the bit is easily obstructed. It has limited depth.

A

Auger Boring

76
Q

An intact cylindrical sample is extracted by drilling through all types of soil including bedrock. Very reliable and expensive

A

Core boring

77
Q

an excavation of an open pit that allow for visual examination of the existing conditions as well as the ability to take intact samples for further testing. Can determine the depth of the water table.

A

test pit